Purity & Third-Party Testing, Explained
By Vanta Labs Research teamPublished 4 min read
Identity versus purity, what an HPLC purity figure measures, what mass spectrometry adds, and what a COA cannot tell you.
Independent, third-party testing is the clearest evidence a supplier can offer about a batch. This guide explains what that testing measures, and where its limits are.
Why third-party
An in-house claim is just a claim. A report from an independent laboratory, which you can check with that laboratory, is evidence about a specific batch.
Identity versus purity
Identity and purity are two different questions, and a report needs a different measurement for each.
- Identity asks whether the sample is the compound named on the label. Our reports answer it with LC-MS, which measures the mass of what is in the sample and compares it with the compound's expected mass.
- Purity asks how much of what the method detects is that compound. Our reports answer it with RP-HPLC and a UV detector.
What an HPLC purity figure measures
HPLC separates a sample into its components, and a UV detector records each one as a peak. Purity is generally reported as the main compound's share of the total peak area at the detection wavelength. That makes it a measure of what the detector can see: an impurity that does not absorb at that wavelength, or that does not separate from the main peak, does not lower the figure. The method, column and wavelength printed on a report tell you how its number was obtained.
Purity is not content
A purity percentage is a share of peak area. It does not say how many milligrams of the compound are in a vial. Our HPLC reports state that separately, as a measured net content beside the labeled quantity, so the two can be compared.
What mass spectrometry adds
LC-MS measures the mass of what is in the sample and compares it with the expected mass. A matching mass is strong evidence of identity, but mass alone does not settle a structure. Our liquid identity reports say so directly: accurate mass establishes a mass and an elemental composition, not a structure.
Identity screens
Some liquids on this site, such as B12 and LIPO-C, are covered only by an identity screen. It lists what LC-MS detected in the vial and states presence, not amount or proportion. It gives no purity figure, and our pages give none for those products.
What a report cannot tell you
A COA describes the sample the laboratory tested, as of the date it was certified. It says nothing about a different batch or a different vial size, it says nothing about tests it does not report, and it is not a statement about any use of the material.
Our standard
Where a batch has been tested, we publish its report in the COA Library and on the product page, with the report number and access code so you can check it at koveralabs.com/verify. A purity figure appears on a product page only where a published report states one for the vial size shown. Where a product has no published report, its page says so. For a walk through each section of a report, see How to Read a Certificate of Analysis, and for what our reports cover, Testing & quality.