
Blends
KLOW
Buy 2, get 1 free80mg
$99.99
Welcome to VANTA LABS
Are you 21 or older?
Vanta Labs supplies research materials for laboratory use only. You must be 21 or older to enter.
Research use only. Not for human or veterinary use.

GLOW is a multi-peptide research blend offered by Vanta Labs as a lyophilized powder for laboratory and in-vitro research. Every batch is independently third-party tested and ships with a Certificate of Analysis confirming >=99% purity, with the lot number matched to its report. For laboratory research use only. Not for human or veterinary consumption; not a drug, food, cosmetic, or dietary supplement, and not intended to diagnose, treat, cure, or prevent any condition.
Purity
99.163%
Batch
Vanta184290
Published batch records
Vanta184290
70 mg · 99.163% · Aug 24, 2026 · Kovera Labs
Frequently Asked Questions
Vanta Labs GLOW is labelled as a three-component blend containing 10 mg of BPC-157, 10 mg of TB-500 (TB-4), and 50 mg of GHK-Cu. The combined labelled amount is 70 mg in one lyophilized vial.
The current Vanta Labs KLOW listing contains the same three components as GLOW plus 10 mg of KPV. Its combined labelled amount is 80 mg, compared with 70 mg for GLOW. The two products have separate batch reports.
It is the sum of the three labelled component amounts: 10 mg BPC-157, 10 mg TB-500 (TB-4), and 50 mg GHK-Cu. It is not 70 mg of each component.
GLOW is a multi-peptide blend containing three separately listed components. It is not one peptide with a single sequence or one molecular identity.
No single product-level CAS number is established for the three-component mixture on the Vanta Labs product page. A CAS number associated with an individual component should not be assigned to the blend as a whole.
No single molecular formula or molecular weight describes the complete blend as listed. Those values apply to specifically identified chemical species, while GLOW is a mixture of three separately labelled components.
A single sequence would not describe a blend containing three separate components. In addition, Vanta Labs does not assert a specific sequence for the component labelled TB-500 (TB-4) based on that name alone.
It is the component label used on the Vanta Labs product page and batch documentation. Vanta Labs notes that the name is used for more than one peptide related to thymosin beta-4, so the label alone is not used to assign one exact sequence or molecular identity.
The labelled amount is the quantity stated for a component on the product composition. A batch report may also state a measured amount for the tested sample. They are separate report fields and should not be confused with a purity percentage.
It is a chromatographic measurement for the tested blend under the method stated in the report. Vanta Labs describes the blend figure as an average purity figure. It should not be presented as a separate purity figure for each component unless the report explicitly gives those values.
Vanta Labs describes the blend report as including an LC-MS identification for the blend. Interpret the finding according to the report's exact wording and scope. Do not assume it separately confirms every component unless the report explicitly states that.
It means GLOW is supplied strictly for laboratory and research purposes, not for human or veterinary use. It is not offered as a drug, food, dietary supplement, cosmetic, or consumer product. Purchasers are responsible for meeting applicable legal and institutional requirements.
No. All compounds sold by Vanta Labs are strictly for legitimate laboratory research purposes and are not intended for human or veterinary use.
Where a batch report has been published, the product page links to it. All published reports are in the COA Library, searchable by batch number.
In-stock orders placed before 2PM ET on a business day are dispatched the same day. Carrier transit time is additional. You will receive secure tracking information after dispatch.
No — exactly one discount applies per order. Promo codes, ambassador codes, bundle pricing, and promotions never combine. You don't have to figure out which is best: checkout automatically applies whichever single discount saves you the most.
Where we ship, damaged or missing items, returns and support are covered in our FAQ.
Related Products
GLOW is the product name for a blend of three separately listed components. It is not the name of one peptide or a single molecular species. The current Vanta Labs product page identifies the blend as BPC-157, TB-500 (TB-4), and GHK-Cu, supplied together as lyophilized powder in one vial. The page lists one available size, 70 mg.
The total is calculated by adding the labelled amounts of the three components:
The sum is 70 mg. This is the combined labelled amount across the three components. It does not mean that each component is present at 70 mg, and it should not be read as a separate 70 mg quantity for any one ingredient. The specification table keeps each component amount visible so the overall figure can be interpreted without guessing.
A multi-peptide blend is described by its composition. It does not automatically have one CAS number, one molecular formula, one molecular weight, or one amino acid sequence that represents every ingredient together. Chemical identifiers and sequence information belong to a particular, precisely identified component. They should not be transferred from the BPC-157 or GHK-Cu product pages to GLOW as a whole.
The name BPC-157 identifies one component in the label. GHK-Cu identifies another. Their individual product pages contain separate identity information for those standalone products. Those pages can help a reader distinguish the component names, but their individual identifiers do not become product-level identifiers for the GLOW mixture.
The third component is shown as TB-500 (TB-4). Vanta Labs states that this label is used for more than one peptide related to thymosin beta-4 and does not assert a specific sequence for the component from the name alone. This page therefore retains the product's displayed name and does not assign a sequence, CAS number, formula, or molecular weight to it without confirmation of the exact chemical species.
GLOW and KLOW are separate blend listings. The current KLOW page lists the same three components as GLOW and an additional 10 mg of KPV, for a combined labelled amount of 80 mg. That is a composition comparison only. Each blend has its own product page and its own batch documentation. A report for KLOW should not be used as documentation for GLOW, or the other way around.
Vanta Labs publishes the composition on the product page and provides batch documentation separately. The report associated with a product and vial size is the appropriate source for batch-specific analytical information. Static product copy should describe the listed composition, while the report itself remains the source for the specific sample, results, and test details.
| Specification | Product information |
|---|---|
| Product name | GLOW |
| Display name | GLOW Multi-Peptide Research Blend |
| Brand | Vanta Labs |
| Product slug | glow |
| Product category | Multi-Peptide Blends |
| Total labelled amount | 70 mg, combined across the three listed components |
| Package type | One vial |
| Supplied form | Lyophilized powder |
| BPC-157 | 10 mg |
| TB-500 (TB-4) | 10 mg |
| GHK-Cu | 50 mg |
| CAS number for the complete blend | No single product-level CAS number established |
| Molecular formula for the complete blend | No single formula applies to the mixture |
| Molecular weight for the complete blend | No single molecular weight applies to the mixture |
A Certificate of Analysis (COA) is a laboratory document for a defined sample. Match the product, labelled vial size, and batch or lot information to the sample named in the report. Vanta Labs ties each published report to the specific sample and vial size tested. Use the COA Library to locate the published record and the guide to reading a COA to understand its fields.
Vanta Labs explains that its GLOW and KLOW blend reports provide an average purity by reversed-phase high-performance liquid chromatography (RP-HPLC), an average net-content figure, and an LC-MS identification for the blend. The report also lists the labelled and measured amount for each component. These are distinct entries and should be read in the context of the report's method and sample description.
An RP-HPLC purity figure is a chromatographic measurement for the tested blend under the conditions recorded in the report. It should not be described as a separate purity figure for every ingredient unless the report explicitly provides separate component-level figures. The product page's blend-level average must not be presented as the individual purity of BPC-157, TB-500 (TB-4), or GHK-Cu.
LC-MS is a mass-spectrometric identity method. Vanta Labs describes the blend report as providing an LC-MS identification for the blend. Do not extend that statement into a claim that every component has been independently identified or quantified by LC-MS unless the report explicitly says so. Similarly, a labelled amount and a measured net-content amount are not purity percentages and should not be treated as interchangeable figures.
A COA records the tests and findings stated by the laboratory for the sample it received. It does not establish a property that was not tested or reported. Vanta Labs' testing guidance states that none of its published reports test for sterility, endotoxins, residual solvents, heavy metals, or water content. A report that does not include a test says nothing either way about a property that was not tested, including microbiological status, which the guidance does not address directly.
GLOW is supplied strictly for laboratory and research purposes. It is not intended for human or veterinary use, including consumption or administration. It is not a drug, dietary supplement, food, cosmetic, or medical device, and it must not be represented as an approved medicine or a consumer product.
The product page is a product-information listing. It is not medical, scientific, or professional advice, and no preparation, dosage, or administration instructions should be inferred from the product name, composition, or documentation. The presence of a Certificate of Analysis does not change the product's research-use classification or establish suitability for human or veterinary use.
Purchasers are responsible for confirming that they meet Vanta Labs' eligibility requirements and that purchase, possession, handling, and laboratory use comply with applicable laws and institutional requirements in their jurisdiction. Vanta Labs' Research Disclaimer sets out the company's research-use terms, purchaser responsibilities, and eligibility requirements. Review that policy before relying on this notice.
All product references to BPC-157, TB-500 (TB-4), and GHK-Cu on this page identify the labelled composition only. They are not statements about health, cosmetic, therapeutic, or other outcomes.
Blog
Store reviews · ordering, shipping and service
5.0 average customer rating
“Ordered on a Wednesday morning and wasn't expecting much because it was my first time buying here. Got tracking that afternoon and the package arrived Friday. Honestly faster than I expected lol.”
Vanta Labs customer
“Not gonna lie I accidentally added the wrong item to my cart and didn't realize until after checkout. Sent a message thinking I'd be stuck with it. Support helped me correct it before the package went out. Saved me a headache.”
Vanta Labs customer
“The packaging was actually what impressed me most. I've had glass research supplies arrive with barely any protection before, so seeing everything packed properly was a relief. Little things like that matter.”
Vanta Labs customer
“First time ordering here. The site was easy enough to use, although I had to go back and double check which size I selected. Everything was labeled clearly when it arrived.”
Vanta Labs customer
“Honestly I spent more time comparing options than I did checking out lol. Once I decided what I wanted, the actual order process took maybe two minutes.”
Vanta Labs customer
“Placed an order after a friend mentioned the website. I was a little skeptical because I hadn't heard of them before, but the ordering experience was straightforward and the communication was good. Everything came fast and will buy again.”
Vanta Labs customer
Sent to us by customers by email; names withheld. Reviews describe ordering, shipping and service.
Compound
Specifications
| Component | Labeled amount |
|---|---|
| BPC-157 | 10 mg |
| TB-500 (TB-4) | 10 mg |
| GHK-Cu | 50 mg |
As labeled on batch report KVR-2026-153C34.
GLOW is a mixture of three separately labelled components, not one molecular species. The blend therefore has no single CAS number, molecular formula, molecular weight, or peptide sequence established by the product listing. The TB-500 (TB-4) label does not establish one exact peptide sequence or molecular identity.
Source: Vanta Labs GLOW product page · Vanta Labs KLOW product page · Vanta Labs Testing & Quality page. Accessed 2026-11-10.
Testing
Certificates of Analysis for the batch currently supplied. Each report is the laboratory's own document for that vial size.
KVR-2026-153C34 · 70 mg · Batch Vanta184290
Blend average purity 99.163% (RP-HPLC, C18 column, DAD detection at 214 nm) · Identity by LC-MS · Certified Aug 24, 2026 · Kovera Labs
Access code IX977Z8
Kovera Labs reports can be checked with the laboratory: enter the report number and access code at koveralabs.com/verify.
Browse the COA LibraryOrdering: Shipping policy · Returns and reimbursement · Research use disclaimer
| Amino acid sequence for the complete blend | Not applicable to the three-component mixture |
| Storage recommendation | Not specified in this product content |
The three labelled amounts add to 70 mg: 10 mg + 10 mg + 50 mg. The amount shown for the blend is not a substitute for the amounts of its individual components. The page describes the material as lyophilized powder; no further storage or handling condition is inferred from that description.
The product-level identity fields are intentionally not populated with BPC-157 or GHK-Cu identifiers. Those identifiers describe the respective component species, not the complete blend. In addition, the label TB-500 (TB-4) does not, on its own, establish one exact peptide sequence or molecular identity. A component-level identifier should be added only if Vanta Labs documents the exact material and source for that identifier.
For the current batch, consult the report linked from the GLOW page. Future batches may have different documents or findings. The Testing & Quality page explains the scope of the site's published reports. This static section does not state batch numbers, report numbers, dates, laboratories, measured percentages, prices, or availability.