
Blends
GLOW
Buy 2, get 1 free70mg
$89.99
Welcome to VANTA LABS
Are you 21 or older?
Vanta Labs supplies research materials for laboratory use only. You must be 21 or older to enter.
Research use only. Not for human or veterinary use.

BPC-157 + TB-500 is a research blend of BPC-157 and a TB-500 (thymosin beta-4) fragment offered by Vanta Labs as a lyophilized powder for laboratory and in-vitro research. Every batch is independently third-party tested and ships with a Certificate of Analysis confirming >=99% purity, with the lot number matched to its report. For laboratory research use only. Not for human or veterinary consumption; not a drug, food, cosmetic, or dietary supplement, and not intended to diagnose, treat, cure, or prevent any condition.
Purity
99.163%
Batch
Vanta184290
Published batch records
Vanta184290
20 mg · 99.163% · Aug 24, 2026 · Kovera Labs
Frequently Asked Questions
It is a two-component laboratory research blend that combines 10 mg BPC-157 and 10 mg of a component labelled TB-500 (TB-4) in a single lyophilized vial, 20 mg total. It is sold for research use only and is not intended for human or veterinary use.
The vial contains two named components only: BPC-157 at 10 mg and TB-500 (TB-4) at 10 mg, combined into one lyophilized powder fill. No excipients or additional ingredients are documented for this listing.
The current listing is split evenly, 10 mg BPC-157 and 10 mg TB-500 (TB-4), for a 20 mg total. This reflects the live product label and the composition recorded on the batch report.
Both components are supplied together as a single lyophilized powder fill in one vial, rather than as two separate powders packaged side by side.
Yes. Because this product is submitted and tested as a combined sample, it has its own batch-specific Certificate of Analysis, distinct from the COA published for the standalone single-compound BPC-157 listing. The two documents are not interchangeable.
Match the batch and report identifiers shown on the product page and vial label against the document available through the product's COA link or the COA Library, rather than relying on a report for a different batch, size, or product.
An HPLC purity figure describes the chromatographic purity of the submitted blend sample under the method and conditions stated on that report. For a two-component blend, this is a blend-level figure unless the report specifically separates the figures by component.
An LC-MS finding is used to confirm the identity of the sample against the laboratory's method and reference data. It does not, by itself, establish sterility, safety, or suitability for any particular use.
A blend is a distinct sample from either component sold on its own, so it is submitted to the laboratory and reported on as its own item. Test findings for a single-compound listing do not automatically apply to a blend that contains that same compound alongside another.
No. A CAS number identifies a specific chemical substance, and this listing combines two distinct peptides rather than one. BPC-157 and the TB-500 (TB-4) component each have their own identifiers, documented separately, rather than one combined identifier for the blend.
"TB-500 (TB-4)" reflects the naming used on this product's own batch report. The term "TB-500" is used in the broader market for more than one related entity, and the report does not establish one specific amino acid sequence, so this listing does not assert a sequence beyond what the report states.
A two-peptide blend is formulated, submitted for testing, and reported on as one combined sample, with one Certificate of Analysis covering both named components. A single-peptide product is tested and reported on as that one compound alone, with its own separate documentation.
10 mg of BPC-157 and 10 mg of a component labelled TB-500 (TB-4), 20 mg in total, as labelled on the blend's own batch report.
Yes. BPC-157 + TB-500 is submitted to the testing laboratory and reported on as one combined sample, with its own Certificate of Analysis separate from the standalone single-compound listings.
No. All compounds sold by Vanta Labs are strictly for legitimate laboratory research purposes and are not intended for human or veterinary use.
Where a batch report has been published, the product page links to it. All published reports are in the COA Library, searchable by batch number.
In-stock orders placed before 2PM ET on a business day are dispatched the same day. Carrier transit time is additional. You will receive secure tracking information after dispatch.
No — exactly one discount applies per order. Promo codes, ambassador codes, bundle pricing, and promotions never combine. You don't have to figure out which is best: checkout automatically applies whichever single discount saves you the most.
Where we ship, damaged or missing items, returns and support are covered in our FAQ.
Related Products
BPC-157 + TB-500 sits in Vanta Labs' Multi-Peptide Blends group, which groups listings that combine more than one named research peptide into a single vial rather than selling each component separately. That distinction matters for how the product is documented: a blend is submitted to the testing laboratory, and reported on, as one sample, not as two individually certified compounds packaged together.
The current listing supplies two named components in equal amounts:
Together they make up the 20 mg total labelled on the vial. Both are supplied as a single lyophilized powder fill, meaning the two components are combined before lyophilization rather than layered or packaged as separate powders within the same vial.
The term "TB-500" is used in the research-peptide market for more than one related entity: a short synthetic fragment and the longer protein it is derived from. Vanta Labs' documentation uses the label "TB-500 (TB-4)" as it appears on the batch report, and this page does not assert a specific amino acid sequence for that component beyond what the report itself states. Researchers who need a precise sequence identification should refer to the product's own Certificate of Analysis rather than to general market naming.
Because BPC-157 and the TB-500 (TB-4) component are reported together, any purity or identity figure on this product's Certificate of Analysis describes the blend sample as tested, not necessarily each component in isolation unless the report states otherwise. The Quality, Purity & Handling section below explains what the published report does and does not establish.
| Component | Labelled Amount | Supplied Form | Package Type |
|---|---|---|---|
| BPC-157 | 10 mg | Lyophilized powder | Vial |
| TB-500 (TB-4) | 10 mg | Lyophilized powder | Vial |
| Total labelled amount | 20 mg | Lyophilized powder | Single vial |
The two components are combined into one lyophilized fill rather than supplied as separate powders in the same vial. Product group: Multi-Peptide Blends. Specifications reflect the currently listed fill and may change if Vanta Labs updates the product's composition or size; always confirm against the live listing and the product's own Certificate of Analysis before relying on a specific figure.
Because BPC-157 + TB-500 is tested as a combined sample, its Certificate of Analysis is specific to this listing and is not interchangeable with the COA published for the standalone BPC-157 product. The current batch report for this listing is available through the product page and the COA Library. For guidance on reading the figures and layout of a report, see How to Read a COA.
A purity figure reported by high-performance liquid chromatography (HPLC) describes the chromatographic purity of the submitted blend sample under the method and column conditions stated on that report. For a two-component blend, this is a blend-level figure unless the report explicitly breaks it out by component. A liquid chromatography-mass spectrometry (LC-MS) finding is used to confirm sample identity against the method the laboratory ran; it does not, on its own, establish sterility, safety, or suitability for any particular use. More on how these methods are applied and verified is covered in Purity and Third-Party Testing and Testing and Quality.
Treat this product as a laboratory research material. Store the sealed, lyophilized vial as directed on the product label and batch documentation, and keep a record of the batch identifiers shown on the report so findings can be matched back to the correct document. Do not rely on figures from a different batch, a different product size, or the standalone single-compound listing when evaluating this blend.
This listing is intended strictly for laboratory research by qualified personnel in a controlled research setting. It is not intended for human consumption, veterinary use, or any clinical, diagnostic, therapeutic, or cosmetic application. Nothing on this page should be read as instructions or guidance for administration of any kind.
Based on a review of FDA's public drug-approval records, neither BPC-157 nor the component labelled TB-500 (TB-4) is listed as an FDA-approved drug. This is a factual statement about regulatory status, not a representation about safety, quality, or fitness for any particular purpose.
Full terms, including the limits of what this listing represents, are set out in the Research use disclaimer and summarized in Research Use Only. By purchasing this product, the buyer represents that it will be used strictly for permitted laboratory research purposes.
Blog
Verified purchases
I have now successfully ordered and received many products that have proven to be exactly what I hoped for. The Customer Service has been amazing. The orders are processed and shipped immediately. I received my first order in less than 24 hours after I ordered it. I can’t say enough good things about this place.
Verified buyer · Nov 15, 2026
Store reviews · ordering, shipping and service
5.0 average customer rating
“Ordered on a Wednesday morning and wasn't expecting much because it was my first time buying here. Got tracking that afternoon and the package arrived Friday. Honestly faster than I expected lol.”
Vanta Labs customer
“Not gonna lie I accidentally added the wrong item to my cart and didn't realize until after checkout. Sent a message thinking I'd be stuck with it. Support helped me correct it before the package went out. Saved me a headache.”
Vanta Labs customer
“The packaging was actually what impressed me most. I've had glass research supplies arrive with barely any protection before, so seeing everything packed properly was a relief. Little things like that matter.”
Vanta Labs customer
“First time ordering here. The site was easy enough to use, although I had to go back and double check which size I selected. Everything was labeled clearly when it arrived.”
Vanta Labs customer
“Honestly I spent more time comparing options than I did checking out lol. Once I decided what I wanted, the actual order process took maybe two minutes.”
Vanta Labs customer
“Placed an order after a friend mentioned the website. I was a little skeptical because I hadn't heard of them before, but the ordering experience was straightforward and the communication was good. Everything came fast and will buy again.”
Vanta Labs customer
Sent to us by customers by email; names withheld. Reviews describe ordering, shipping and service.
Compound
Specifications
| Component | Labeled amount |
|---|---|
| BPC-157 | 10 mg |
| TB-500 (TB-4) | 10 mg |
As labeled on batch report KVR-2026-47D7CA.
The label "TB-500 (TB-4)" used on this product's batch documentation covers more than one related entity in the research-peptide market: a short synthetic fragment (Ac-LKKTETQ, CAS 885340-08-9) and the longer, full-length Thymosin Beta-4 protein it is derived from (CAS 77591-33-4). The blend's batch report does not state which specific sequence was supplied, so this listing does not assert one. Because the blend combines two distinct research peptides rather than one compound, it is not assigned a single shared CAS number or molecular weight; each component's identifiers are listed separately above where they could be verified against public chemical databases.
Source: Wikipedia, BPC-157 · Wikipedia, TB-500 · Vanta Labs Research, BPC-157 + TB-500 product page. Accessed 2026-11-10.
Testing
Certificates of Analysis for the batch currently supplied. Each report is the laboratory's own document for that vial size.
KVR-2026-47D7CA · 20 mg · Batch Vanta184290
Blend average purity 99.163% (RP-HPLC, C18 column, DAD detection at 214 nm) · Identity by LC-MS · Certified Aug 24, 2026 · Kovera Labs
Access code I82S90R
Kovera Labs reports can be checked with the laboratory: enter the report number and access code at koveralabs.com/verify.
Browse the COA LibraryOrdering: Shipping policy · Returns and reimbursement · Research use disclaimer